All in One ! The Smart2Pure™ Pro system is a compact system which converts tap water to into ASTM Type 1. The Smart2Pure Pro UV/UF 16 LPH offers the choice of a 30 L or 60 L reservoir for customizable storage capacity and ability to dispense both ASTM Type 1 and Type II water.

Lasting economy:

Water purification progresses through independent cartridges with Aquastop quick connects for fast replacement.
Module 1 reverse osmosis catridges to remove up to 99% of tap water impurities
Module 2 includes a polishing cartridge that contains high-quality ultrapure resin for consistent purity and long cartridge life.

Easy-to-operate:

Dispensing is easy and features variable speed to control flow.
The display can be tilted for optimal reading.
Simplified User Interface

Placement Options:

Position on laboratory bench
Mount it on the wall

New Features:

Automatic Standby mode when system is not in use recirculates water through system to maintain purity
Leak detector shuts off water supply and system if leak is detected
Alerts show on display when to replace consumables
Reverse osmosis water quality monitoring
Inline ultrafilter with large surface area to remove endotoxins and nucleases.
System parameters are code-protected to prevent accidental changes to set points

Smart2Pure Pro offers reservoir options, either 30 or 60L:

Large opening allows easy and effective cleaning by hand.
Sterile venting filter/reservoir overflow protects against contamination by microorganisms.
Optional CO2 absorber prevents TOC value increases from drawn-in CO2.
Polyethylene reservoir is opaque to light.
Recirculation pump protects the high purity water from bacterial growth during standstills and maintains the low conductivity value.
Wall-mount is optional for simple space-savings.
Conical bottom outlet allows for complete draining and efficient cleaning and disinfection.

Optional Hand Dispenser:

Gain increased flexibility by adding a hand dispenser with 3m cord (Part #50138221)

Bacterial retention 0.99
Conductivity Type 1: 0.055μS/cm and Type II: 0.067 to 0.1μS/cm
Bacterial Content <0.01 CFU/mL Feedwater Connector 3/4 in. NPT and 1/2 in. NPT Feed Water Monitoring No Feedwater Source Tap Flow Rate Up to 1 L/min. Product Water Type Type 1 and 2 TOC Monitor with UV Intensity Monitoring No Total Organic Carbon 1 to 5 ppb Type Water Purification System Feedwater Pressure 1 to 6 bar Includes Complete system includes Barnstead Pretreatment system with cartridges, RO/pretreatment cartridge, an ultrapure polisher cartridge, sterile 0.1 μm filter, UV lamp, UF filter, 30 L tank, CO2 vent filter, sterile overflow and system wall bracket Model Smart2Pure Pro 16 UV/UF with 30L Tank - Complete system Operating Pressure 1 to 6 bar Particles >0.2µM/mL <1 Permeate performance 16 L/hr. at 10°C Power Consumption 0.12 kW RO Flow Rate 16 L/hr. Width (Metric) 305 mm Height (Metric) 545 mm Depth (Metric) 300 mm Weight (Metric) 22 kg Electrical Requirements 100/240 V 50/60 Hz Voltage 100/240 V Frequency 50/60 Hz Unit Size Each